LEXMARK T620 DUPLEX DRIVER

| | 0 Comments

If you can’t see any paper jammed in the back area of the duplex unit, remove the front access tray to the duplex option. Did this document help solve your problem? For jam removal instructions specific to your printer, please refer to the User’s Guide. Power off the printer. Remove any paper you find jammed in the back area of the duplex option, following these instructions:

Uploader: Shaktigis
Date Added: 2 November 2016
File Size: 45.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 50990
Price: Free* [*Free Regsitration Required]

Check carefully for any jammed diplex crumpled sheets of paper. Remove any and all sheets of paper you find jammed in the unit. Remove any paper you find jammed in the back area of the duplex option, following these instructions: Did this document help solve your problem?

If the printer has any extra trays drawer options installed, lift the duplex unit up off them too. After removing the paper from the duplex unit, the printer may alert you to other paper jammed elsewhere in the printer.

If your printer is posting a Duplex Paper Jam error, do the following: Once you have removed all paper from the back of the duplex unit, close the rear duplex cover. Then the two sheets will separate at the duplex option’s reverse point.

  LOGITECH QUICKCAM FOR NOTEBOOKS PRO LINUX DRIVER

Lexmark Parts Store

The diagram on the right also shows how a sheet of paper can be lexmar up inside the duplex option. Make sure it snaps fully into place.

Look into the duplex unit. Once you have removed all the paper from the front and back areas of the lwxmark unit and the printer, try printing again.

If paper continues to jam after you have checked all of the above or if you cannot locate any paper when the jam occurs, the duplex unit may require service.

For jam removal instructions specific to your printer, please refer to the User’s Guide.

Paper is jammed in the path area in front of the duplex option. Lift the printer up off the duplex option.

Lexmark T Duplex Cassette Assembly (OEM) Sheets

If you can’t see any paper jammed in the back area of the duplex unit, remove the front access tray to the duplex option. The printer can still use the optional trays without a duplex unit installed.

You should hear it snap into place. You can press in on the button shown in the diagram below to pop this door open.

  MIRASCAN USB DRIVER

To remove the duplex option: Make sure the cover is fully closed. Solution T6620 your printer is posting a Duplex Paper Jam error, do the following: Look inside the duplex option. There may be more than one sheet of paper jammed in the duplex unit.

Lexmark T620

First, open up the rear access door of the duplex option. Sit the printer back down in its place. Proper paper loading techniques may help prevent these paper jams.

If there is an extra tray drawer installed on the printer, sit the printer directly down on top of the tray 2 drawer. Please enter the email address you would like to send a copy of this page to.

The paper will not jam until it reaches the oexmark option. Power off the printer. Paper is jammed inside the duplex option.